1. Introduction
Optical Component Surface Defect Detector is inspection equipment for surface quality evaluation of optical elements such as lenses and reflectors. It can automatically recognize surface defects including scratches and pits, effectively reducing subjective errors caused by human visual judgment.
Inspection can be executed according to built-in criteria, Chinese national standard GB/T 1185-2006 or MIL-PRF-13830B. The workflow covers automatic positioning, image acquisition, defect analysis, grade assessment and inspection report generation. Featuring fast inspection speed, objective results and good repeatability, the system is applicable for batch inspection, quality control and production testing of various optical components.
2. Technical Specifications
| Item |
Parameter |
| Inspection Standards |
GB/T 1185-2006, MIL-PRF-13830B |
| Detectable scratch grade (MIL-PRF-13830B) |
Grade 10, 20, 40, 60, 80 |
| Detectable scratch grade (GB/T 1185-2006) |
0.004 ~ 0.1 |
| Detectable pit grade (MIL-PRF-13830B) |
Grade 5 ~ 70 |
| Detectable pit grade (GB/T 1185-2006) |
0.016 ~ 0.63 |
| Miss detection rate |
≤1% (@40/20 inspection standard) |
| False detection rate |
≤10% (@40/20 inspection standard, dirt contamination excluded) |
Note: Specifications are for reference only and subject to change without prior notice.
3. Applications
- Surface defect inspection for finished optical lenses, reflectors, prisms and protective windows
- Production quality inspection for infrared and visible-light optoelectronic components
- Incoming and delivery quality inspection for high-grade optical parts
- Automatic mass screening on optical manufacturing production lines to replace partial manual visual inspection
4. Test Result
5. FAQs
Q1: What defects can this equipment detect?
A: It automatically detects surface scratches and pits on optical components.
Q2: Which inspection standards are supported?
A: It supports GB/T 1185-2006 and MIL-PRF-13830B.
Q3: What are the core detection performance indicators?
A: Miss detection rate ≤1%; false detection rate ≤10% (dirt contamination excluded, under 40/20 standard).
Q4: Where can this detector be deployed?
A: It can be used for lab sampling check, incoming-goods inspection, and mass automatic screening on optical production lines.
